Browser screen size: *
OCC-L2 & PH-L2
Occupancy Sensor & Photo Sensor
Overview
This Occupancy Sensor is connected to LDM II-L2 and enables integrated control not only of LDM but also other control modules. The sensing range is within a 5m radius. Delay time and enable/disable settings are configured via STS.
The Photo Sensor is also connected to LDM II-L2 and allows integrated control with other modules. The sensing range is 0–753 LUX (0–70 FC). Enable/disable settings are configured via STS.
The Photo Sensor is also connected to LDM II-L2 and allows integrated control with other modules. The sensing range is 0–753 LUX (0–70 FC). Enable/disable settings are configured via STS.
Feature
- Connected via LDM-2 in the RLCM CAN network
- Each sensor can control LDM2 individually
- Delay time and enable/disable configurable via STS or MR BLE App
Operation
Application
The occupancy sensor and photo sensor are installed in the same housing. Each sensor must be connected through the LDM2 module. They can control individual LDM2 modules or multiple control modules. Configuration is done via STS or MR BLE App.
Speicfication
- Operating condition:
- Temperature: 0℃ ~ +40℃, Humidity: up to 90% RH
- Sensing range:
- Occupancy: up to 5m
- Light sensor: 0–753 LUX (0–70FC)
- Microwave sensor: up to 10m
- Sensor settings:
- Delay OFF time: configurable via software
- Enable/Disable: selectable
- Min/Max level: configurable via software
Network
Dimension
User Interface
Layout
System Diagram
Connect Diagram
