엠알바스

The Lighting Dimming Control Panel (DCP) is installed within or adjacent to the lighting distribution panel.

Lighting circuits are controlled using latching relays and DC 0–10V dimming output channels.

The 0–10V dimming method adjusts the control voltage between 0V and 10V, enabling smooth LED dimming from 0% to 100% light output.

For optimal lighting performance and control efficiency, lighting load zones should be carefully defined during the design phase.

LED lighting fixtures are controlled by individual circuits. Each circuit requires a dedicated On/Off relay, and the number of fixtures per circuit is determined by the relay rating (15A).

Each LED fixture typically draws approximately 1mA of control current, with a maximum requirement of 2mA. Accordingly, a dimming circuit serving 20 LED fixtures should provide a minimum of 20mA DC control current.